Winter will soon arrive so it is time again to prepare stock on your firewood reserves to keep the fire in your fireplaces burning to heat your own homes across the winter season. It is very helpful to know the best way to store them so that they can be seasoned properly. Firewood is a wood product that is collected and used as a source of fuel in the suburbs and the countryside. The harvesting and collecting of firewood differ according to region and culture. There is firewood that is soft and there are other that are hard. There are some that can emit less smoke and there are some that can create more heat. There are even some types that produce less creosote which is often the cause of chimney fires. Softwoods are good for piling and cutting firewood as well as putting it on the wood burner to heat up the entire house. The best time to cut logs firewood is during the times when the trees around begin to shed their leaves.

When you have just chopped fresh firewood, it is still likely to contain about 60% water or more. This will not burn definitely in the fireplace. You must season or dry first the woods for its water content to be released until it is only about 20% or lesser. When that time comes, it is ready to be used as fuel for burning. Seasoning firewood requires draining the water content of the wood through evaporation. Drying the firewood can cause it to burn easily, efficiently, and safely.

The best size of splitting firewood is by cutting them from six to eight inches in diameter and 18 inches when it comes to length. This must be your goal in chopping wood. It must be placed outside so that they can dry up and be fit enough to emit enough heat.Piling the wood in an orderly way can make it dry quickly. You must make sure that you put a base under them to keep it from touching the ground and to avoid the occurrence of soil moist. A pallet can be used as a good base since it is a few inches higher above the ground. You must also place a space in between the firewood pile and the wood for proper air ventilation and passage. A pallet as a base of the stack will also permit air flow to your stack. Remember that air can speed up the process of drying.

Avoid covering the firewood stack when it is not yet dry. Do not also cover the end to allow the proper flow of air and its circulation. It quickens that release of moisture if it has no covers. Covering the stack too soon may slow the drying and it can increase drying time. If you think you really need to have them covered, make sure that they are already dried up before doing so.Place your firewood in a location where there is direct sunlight throughout the day. There are beliefs about covering the pile while seasoning firewood. Others say that you should over the stack to shield it from rain while others believed otherwise. By no matter what, covering the stack is a no-no. The length of time that firewood would definitely be dried up is about eight months.

The best way to split firewood can be read on the blogs and websites about firewood so pay them a visit now if you are interested.